Shopsmith Model Mark V / Mark 7 Specifications
Motor / Power | Mark 7 Model | Mark V Models |
|---|---|---|
| Type | DVR (Digital Variable Reluctance | Conventional AC |
| Wired For | 120 and 240 volts | 120 Volts |
| Amperage | 15A at 120V, 7A at 240V | 13.5 amps |
| Horsepower | 1-3/4 hp at 120 volts 2 hp at 240 volts | 1-1/8 hp |
| Speed Change Mechanism | Electronically controlled | Pulleys and belts (Reeves drive) |
| Speed Range | 250 rpm to 10,000 rpm | 700 rpm to 5,200 rpm |
| Reversible | Yes | No |
Individual Tool Specifications - Common to all models
| Specification | Comment | |
|---|---|---|
| Table Saw | ||
| Main Table Size | 17-1/2" x 22" | Left-to-right support with extension tables and tubes - 102" |
| Saw Blade Diameter | 10" | |
| Maximum Depth of Cut | 3-1/4" at 0° | Saws completely through 4 x 4 lumber |
| Maximum Ripping Capacity | 98" | |
| Miter Range | 60° left to 60° right | Holds your stock at precise angles during sawing |
| Disc Sander | ||
| Disc Diameter | 12" | A full 113 square inches of sanding surface |
| Disc Feed | 4-1/4" | For precise micro-feed of disc into stationary workpiece |
| Miter Range | 60° left to 60° right | Holds your stock at precise angles during sanding |
| Horizontal Boring Machine | ||
| Maximum Stock Length | Unlimited | Great for long boards and large workpieces |
| Quill Feed | 4-1/4" | Feeds bit into your stock, as with vertical drill press |
| Vertical Drill Press | ||
| Capacity | Drills to center of 16-1/2" workpiece | Rarely do typical drill press tasks require more |
| Main Table Size | 17-1/2" x 22" | Floating extension tables & (4) 27" tubes can provide up to 00-0/0" of front-to-back workpiece support |
| Maximum Chuck-to-Table Distance | 25" | Can drill into large project component assemblies |
| Maximum Chuck-to-Floor Distance | 58" | Can drill into large project component assemblies |
| Quill Feed | 4-1/4" | |
| Lathe | ||
| Swing Over Ways | 16-1/2" | Easily handles large diameter faceplate turnings |
| Maximum Distance between Centers | 34" | Turns table legs, porch rails, etc. up to 34" long - as well as small projects such as pens & miniatures |
| Tool Rest | 360° swing of tool rest & arm | Simplifies tool rest-to-workpiece alignment |
| Over-Table Router* | ||
| Throat Clearance | 7-5/8" | |
| Spindle Stroke | 4-1/4" | Exceeds that of portable plunge routers |
| Bit Chuck | 1/2" diameter | 1/4" diameter model also available |
| Worktable Size | 17-1/2" x 22" | Floating extension tables & (4) 27" tubes can provide up to 00-0/0" of front-to-back workpiece support |
| Spindle Speeds | 250 rpm to 10,000 rpm | |
| Under-Table Shaper* | ||
| Throat Clearance | 7-5/8" | |
| Spindle Stroke | 4-1/4" | |
| Arbor Diameter | 1/2" | Includes 25/32", 1", 1-1/4" & 1-1/2" rub collars |
| Worktable Size | 17-1/2" x 22" | Floating extension tables & (4) 27" tubes can provide up to 00-0/0" of front-to-back workpiece support |
| Spindle Speeds | 250 rpm to 10,000 rpm |
* Under-table shaping operations are only possible with the Mark 7 version.
